|Outlet Temperature||20 to 100 Degree C|
|Tubesheet Thickness||400 mm|
|Overall Length||20 m|
Shell & Tube Direct Expansion Refrigeration Chillers are designed and fabricated under the direct supervision of a team of Engineers well experienced in the line of Heat Transfer Equipment. Every care is taken to ensure a long and trouble free service and the desired performance from the equipment.
It is also a type of shell and tube chiller where the water runs through the tubes and the refrigerant flows over the outside of the tubes within a closed shell. Mainly in the flooded chiller approximately 50% to 75% of the tubes are immersed in liquid refrigerant and the space above provides an allowance for the vapor generated through evaporation of the liquid below. This type is more often used with screw or centrifugal type compressors.
These two styles of evaporators are commonly used in advantage process liquid chillers. The evaporator is where the process water is cooled during the refrigerant-to-water heat exchanger portion of the chilling cycle.
|Flow Rate||60000 m3/hr|
|Surface Finish||Color Coated|
|Outer Diameter||3/4" , 1/2" , 5/8" , 3/8"|
|Tube Side BSP||MS,CS,SS|
|Inlet Temperature||60 Degree C|
|Maximum Working Pressure||10 to 1000 kg|
|Tubesheet Thickness||200- 400 mm|